Baileigh Industrial Equipment
Bench Grinders & Grinding Wheels
Drill Presses & Pillar Drills
Engineering Hand Tools
Engineering Hand Tools - Measuring Equipment
Metal Lathes & Mill/Drills
Pipe Notchers
Punches and Dies
Sheet Metal
Wrought Iron Components

Showing 81–100 of 117 results

  • CM220 Dial Test Indicator

    €25.57

    A precision 0-10 mm plunger type indicator with adjustable dial and knurled bezel for zero setting. Features
    Large clear dial with integral rev. counter
    Built in rear mounting lug.
    Reads graduations 0.01 mm over 10 mm travel
    Hardened stainless steel rack and sensitive pivot bearings for accuracy.

    Add to cartDone

  • CM230 Dial Test Indicator

    €46.27

    A precision 0 – 0.8 mm lever type indicator with low inertia jewelled bearings and tungsten carbide contact point for high sensitivity, repeatability, and accuracy. Features
    Adjustable bezel for zero setting.
    Auto reversible contact point adjusts through 240°
    Supplied with 6 mm & 8 mm diameter dovetail attachments.
    Reads 0-40-0° – in 0.07mm graduations

    Add to cartDone

  • CM240 Vernier Height Gauge

    Price on request

    For precise measuring and scribing this vernier height gauge ensures high accuracy readings within the range 0-12″ (0-300mm). Manufactured from the finest quality stainless steel hardened and ground as appropriate. Features
    Dual calibration with gradations to 0.02mm / 0.001″.
    Fine adjustable facility.
    Lockable measuring slide with magnifier.
    Adjustable zero / reference scale setting.
    Tungsten carb

    Ask for Price

  • Cockrell Silhouette (5mm Thick Steel)

    €34.44

    Code: K1101
    Size: 290mm (w) x 300mm (h)
    Weight (kg): 1kg
    Shape: Cockrell

  • Cow Silhouette (5mm Thick Steel)

    €45.51

    Code: K1123
    Size: 390mm (w) x 240mm (h)
    Weight (kg): 1kg
    Shape: Cow

  • DIY 150W Bench Grinder

    €60

    Features
    Bench-mounted grinder fitted with 150mm coarse (36 grit) and fine grade (60 grit) grinding wheels. Strong cast-aluminium body houses a long-life 150W induction motor with sealed bearings. Bolt holes and rubber mounting feet for bench mounting. Dust-protected switch. Ideal for light to medium duty grinding tasks on metal workpieces, such as sharpening drill bits and cutting/shaping tools,

  • ET102 Automatic Centre Punch

    €8.15

    Hand pressure alone will operate this surface impacting and marking device. Adjusting the internal spring tension varies the depth of impression.
    Features
    Hardened & ground punch points
    No hammer required
    Point is easily removed for re-sharpening or replacement

  • ET106 Carbon Tipped Scriber

    €4.26

    This pen style engineers marking tool with a comfortable grip is effective on the hardest of surfaces. Integral clip for pocket convenience.
    Features
    For use on hardest of metals
    6″/150mm long
    Black finish
    Slimline design, comfortable to use

  • ET108 Engineers’ Scriber

    €7.13

    A double ended 190mm surface marking tool with straight and 90° points both hardened and ground for long life.
    Features
    Hardened & ground points
    Straight and 90° points
    7½” Long

  • ET128 Depth Gauge With Protractor

    €19.48

    A Stainless Steel measure with etched graduations for the precision engineer to determine depths up to 6″ (150mm) and angles through 180 degrees. Features
    Dual calibration – inches/mm
    Etched graduations 0° – 180° degrees
    150mm rule adjustable throughout its length
    Spring tension nut locks rule for accurate depth & angle measurement.

  • ET133 3 Piece Spring Caliper Set

    €19.48

    A useful set of 3 comparative measures for the precision engineer. Features springs which are hardened and tempered. Features
    150mm Spring Dividers
    150mm Outside Spring Calipers
    150mm Inside Spring Calipers
    Hardened & tempered Springs

  • ET134 6" Pocket Rule

    €3.41

    A slim 150mm Stainless Steel measure with clip designed to slip easily into the engineers pocket. Features
    Manufactured from stainless steel
    Calibrations etched in imperial and metric.

  • ET135 12" Engineers Rule

    €6.94

    A standard 300mm Stainless Steel measure for the precision engineer.
    Features
    Manufactured from stainless steel
    Calibrations etched in imperial and metric.

  • ET153 – 3 Piece Spring Caliper Set

    €26.79

    A trio of popular engineers measuring instruments, precision made from fine quality steel to ensure accuracy. Features
    200mm spring dividers
    200mm outside spring calipers
    200mm inside spring calipers
    Knurled wheels for positive adjustment.

  • ET156 – 3″ Feeler Gauge

    €14.61

    Precision made, dual calibrated measuring blades of fine quality steel – hardened, tempered and polished for long term accuracy. Features
    26 leaves from 0.0015″ (0.038mm) to 0.025″ (0.635mm)
    Locking screws holds one or more blades in position whilst in use.

  • Flower Patterned – Flat

    €35.67

    wrought iron components

  • Golfer Silhouette (5mm Thick Steel)

    €38.13

    Code: K1109
    Size: 290mm (w) x 305mm (h)
    Weight (kg): 1kg
    Shape: Golfer

  • Gun Dog Silhouette (5mm Thick Steel)

    €47.97

    Code: K1108
    Size: 360mm (w) x 260mm (h)
    Weight (kg): 1kg
    Shape: Gun Dog

  • Hunter & Dog Silhouette (5mm Thick Steel)

    €75.03

    Code: K1103
    Size: 400mm (w) x 385mm (h)
    Weight (kg): 1kg
    Shape: Hunter & Dog

  • Hurler Silhouette (5mm Thick Steel)

    €34.44

    Code: K1117
    Size: 340mm (w) x 305mm (h)
    Weight (kg): 1kg
    Shape: Hurler

End of content

End of content