Shape, cut, and craft with precision using premium Metalworking tools and accessories from WWS , the trusted choice for welders and fabricators across Ireland . Whether you’re cutting sheet metal, filing, grinding, or assembling parts, our metalworking tools are designed to support everyday welding and fabrication tasks. From snips and shears to clamps, hammers, and chisels, our collection is built for power, control, and long-lasting durability. Each tool helps you create clean, accurate work while saving time and effort in the workshop or on-site. Engineered to handle tough conditions, these tools deliver performance you can rely on job after job. At wholesaleweldingsupplies.ie , we provide gear that makes metalwork faster, cleaner, and more precise.
Choose WWS for metalworking tools that match your skills and your standards.
Showing 81–100 of 117 results
A precision 0-10 mm plunger type indicator with adjustable dial and knurled bezel for zero setting. Features
Large clear dial with integral rev. counter
Built in rear mounting lug.
Reads graduations 0.01 mm over 10 mm travel
Hardened stainless steel rack and sensitive pivot bearings for accuracy.
A precision 0 – 0.8 mm lever type indicator with low inertia jewelled bearings and tungsten carbide contact point for high sensitivity, repeatability, and accuracy. Features
Adjustable bezel for zero setting.
Auto reversible contact point adjusts through 240°
Supplied with 6 mm & 8 mm diameter dovetail attachments.
Reads 0-40-0° – in 0.07mm graduations
For precise measuring and scribing this vernier height gauge ensures high accuracy readings within the range 0-12″ (0-300mm). Manufactured from the finest quality stainless steel hardened and ground as appropriate. Features
Dual calibration with gradations to 0.02mm / 0.001″.
Fine adjustable facility.
Lockable measuring slide with magnifier.
Adjustable zero / reference scale setting.
Tungsten carb
Code: K1101
Size: 290mm (w) x 300mm (h)
Weight (kg): 1kg
Shape: Cockrell
Code: K1123
Size: 390mm (w) x 240mm (h)
Weight (kg): 1kg
Shape: Cow
Features
Bench-mounted grinder fitted with 150mm coarse (36 grit) and fine grade (60 grit) grinding wheels. Strong cast-aluminium body houses a long-life 150W induction motor with sealed bearings. Bolt holes and rubber mounting feet for bench mounting. Dust-protected switch. Ideal for light to medium duty grinding tasks on metal workpieces, such as sharpening drill bits and cutting/shaping tools,
Hand pressure alone will operate this surface impacting and marking device. Adjusting the internal spring tension varies the depth of impression.
Features
Hardened & ground punch points
No hammer required
Point is easily removed for re-sharpening or replacement
This pen style engineers marking tool with a comfortable grip is effective on the hardest of surfaces. Integral clip for pocket convenience.
Features
For use on hardest of metals
6″/150mm long
Black finish
Slimline design, comfortable to use
A double ended 190mm surface marking tool with straight and 90° points both hardened and ground for long life.
Features
Hardened & ground points
Straight and 90° points
7½” Long
A Stainless Steel measure with etched graduations for the precision engineer to determine depths up to 6″ (150mm) and angles through 180 degrees. Features
Dual calibration – inches/mm
Etched graduations 0° – 180° degrees
150mm rule adjustable throughout its length
Spring tension nut locks rule for accurate depth & angle measurement.
A useful set of 3 comparative measures for the precision engineer. Features springs which are hardened and tempered. Features
150mm Spring Dividers
150mm Outside Spring Calipers
150mm Inside Spring Calipers
Hardened & tempered Springs
A slim 150mm Stainless Steel measure with clip designed to slip easily into the engineers pocket. Features
Manufactured from stainless steel
Calibrations etched in imperial and metric.
A standard 300mm Stainless Steel measure for the precision engineer.
Features
Manufactured from stainless steel
Calibrations etched in imperial and metric.
A trio of popular engineers measuring instruments, precision made from fine quality steel to ensure accuracy. Features
200mm spring dividers
200mm outside spring calipers
200mm inside spring calipers
Knurled wheels for positive adjustment.
Precision made, dual calibrated measuring blades of fine quality steel – hardened, tempered and polished for long term accuracy. Features
26 leaves from 0.0015″ (0.038mm) to 0.025″ (0.635mm)
Locking screws holds one or more blades in position whilst in use.
Code: K1109
Size: 290mm (w) x 305mm (h)
Weight (kg): 1kg
Shape: Golfer
Code: K1108
Size: 360mm (w) x 260mm (h)
Weight (kg): 1kg
Shape: Gun Dog
Code: K1103
Size: 400mm (w) x 385mm (h)
Weight (kg): 1kg
Shape: Hunter & Dog
Code: K1117
Size: 340mm (w) x 305mm (h)
Weight (kg): 1kg
Shape: Hurler
End of content
End of content
In order to provide you a personalized shopping experience, our site uses cookies. By continuing to use this site, you are agreeing to our cookie policy.
Don't have an account yet? Sign up
Maxflow Semi-Industrial Pressure Washer - Honda GX200 14 LPM Cage Frame + Reel (Electric Start)
1 × €2,100
Parweld XTE 181C Automotive Compact MIG Welder with Torch & Regulator (Make your own kit)
1 × €699
270 Litre 10HP 10 Bar Compressor (3 Phase)
1 × €3,380
HGPS-0.6-360 BAHCO 1.25LB HATCHET
1 × €22
XP8 Diffuser Ceramic M10 Head (XP8-350A/400A/450W) - Packet of 5
1 × €14.76
SIP 1/2" 17pc Air Impact Wrench Kit
1 × €77