ET108 Engineers’ Scriber
€7.13A double ended 190mm surface marking tool with straight and 90° points both hardened and ground for long life.
Features
Hardened & ground points
Straight and 90° points
7½” Long
Showing 1601–1620 of 4763 results
ET110 Machinists Steel Square (150mm)
€12.18An engineers means to accurately check the right angle.
Features
6″ blade is hardened, tempered and polished.
Both beam and blade are ground for straightness and parallelism.
ET111 Machinists Steel Sqare (200mm)
€18.27An engineers means to accurately check the right angle.
Features
8″ blade is hardened, tempered and polished.
Both beam & blade are ground to ensure they are both straight & parallel.
ET113 125mm Mini Magnetic Stand
€24.35A useful accessory for the precision engineer, this magnetic stand features a powerful grip and fine adjustment. Features
Compact with powerful magnetic base
Includes disc on base to retain magnetism when not in use
For use with dial indicatorsET114 Magnetic Base – Push On/Off
€60.89A useful accessory for the precision engineer, this magnetic base includes a powerful base grip, magnetism on two sides and an ON/OFF push switch Features
Powerful magnetic base wit on/off switch
Magnetised on two sides
For use with dial indicatorsET115 V Block & Clamp Set
€68.19An identical pair of ‘V’ blocks for precision engineering applications, each supplied with a steel screw clamp. Manufactured from tool steel, hardened and ground to a high degree of accuracy Features
Made of hardened & ground tool steel
Supplied in pairs
V’ capacity 1½”
Block sizes 1¼x1¼x1½ inchesET125 Emery Wheel Dresser
€9.74Get the very best from your bench grinder by ensuring that the wheels are clean and true. For precision results this simple tool does it all. Features
Suitable for wheels up to 250mm dia. x 50mm wide.
Cast iron constructionET128 Depth Gauge With Protractor
€19.48A Stainless Steel measure with etched graduations for the precision engineer to determine depths up to 6″ (150mm) and angles through 180 degrees. Features
Dual calibration – inches/mm
Etched graduations 0° – 180° degrees
150mm rule adjustable throughout its length
Spring tension nut locks rule for accurate depth & angle measurement.
ET129 Magnetic Weld Clamp
€26.74A unit comprising 2 powerful linked magnets and used for holding separate pieces of ferrous material in position at varying angles prior to and during welding.
ET133 3 Piece Spring Caliper Set
€19.48A useful set of 3 comparative measures for the precision engineer. Features springs which are hardened and tempered. Features
150mm Spring Dividers
150mm Outside Spring Calipers
150mm Inside Spring Calipers
Hardened & tempered SpringsET134 6" Pocket Rule
€3.41A slim 150mm Stainless Steel measure with clip designed to slip easily into the engineers pocket. Features
Manufactured from stainless steel
Calibrations etched in imperial and metric.
ET135 12" Engineers Rule
€6.94A standard 300mm Stainless Steel measure for the precision engineer.
Features
Manufactured from stainless steel
Calibrations etched in imperial and metric.
ET138 16-Piece Punch & Chisel Set
€36.53A useful selection of punches and chisels for general building maintenance and repair work, manufactured from tough chrome vanadium steel with a fine sandblast finish. Features
5 pin punches 5/32″ to ¼”
5 taper punches 3/32″ to ¼”
3 cold chisels 3/8″ ½” & 5/8″
2 centre punches 1/8″ & 3/16″
1 chisel punch gauge
ET139 12-Piece Punch & Chisel Set
€48.71A useful selection of well sized punches and chisels for general building maintenance and repair work, manufactured from drop forged hardened steel with a fine sandblast finish. Features
6 cold chisels from ½” to 1″ and up to 10″ long.
2 centre punches 5/32″ & 7/32″ up to 8″ long.
3 taper punches 1/8″ to 3/8″ and up to 10″ long.
1 pin punch 3/8″ x 8″ long
All contained in a handy roll pouch.
ET146 Number Punch Set 6.0mm
€9.74Hardened & tempered steel letter & number punch sets with black finish. Ideal for a variety of security marking applications, supplied in storage cases.
Model: ET146
Letter / Number: Number set
Qty.in Set: 9
Character Height: 6.0mm
ET151 Steel Machinist Square (250mm)
€35.31Precision made from the best quality steel for operators regularly checking to ensure linear and 90° accuracy
Features
250mm steel blade hardened & tempered
Ground for straightness & parallelism
Groove on inside corner for clearance.
ET153 – 3 Piece Spring Caliper Set
€26.79A trio of popular engineers measuring instruments, precision made from fine quality steel to ensure accuracy. Features
200mm spring dividers
200mm outside spring calipers
200mm inside spring calipers
Knurled wheels for positive adjustment.ET154 Diamond Tip Wheel Dresser
€10.96Bench Grinder wheels, accurately shaped and cleaned with this diamond dressing tool, will ensure the precision honing and sharpening of cutting tools. Features
0.5 carat diamond tip
Made from hardened, tempered & polished steel.ET156 – 3″ Feeler Gauge
€14.61Precision made, dual calibrated measuring blades of fine quality steel – hardened, tempered and polished for long term accuracy. Features
26 leaves from 0.0015″ (0.038mm) to 0.025″ (0.635mm)
Locking screws holds one or more blades in position whilst in use.
ET161 17 Piece Punch Set
€40.18A comprehensive set of punches to cover most practical requirements. Including both non sparking brass pieces and others made from conventional hardened steel. Features
8 assorted steel pieces
8 assorted brass pieces
1 automatic centre punch
End of content
End of content
French Chalk Holder & Chalk